The initial publication of this coach is an attempt to make a simple model for the "Christmas tree" project.
Some discussion is needed to simplify the design to make it easy to print. Currently the break gear on the ends of the coach are rather fragile and the body, if printed on a resin printer probably needs dividing into two for most printers.
The smaller components were designed for resin printing. The body, when resin printer is in two parts.
S1 - 4 compartment second later converted to third class.
4 wheels
25' x 8' - 18' wheelbase
100 built between 1871 and 1872 in 2 lots
Coach numbers 287 to 326 and 327 to 386
Models
3D Model
This is the full body with handles, end staps, rails etc.
3D Model
1/2 body (1 of 2) which should fit onto many resin printers.
3D Model
1/2 body (2 of 2) which should fit onto many resin printers.
3D Model
Full roof with gas lights and pipes
3D Model
1/2 roof sized for resin printer.
3D Model
2nd half or roof.
3D Model
Full detailed underframe. For reference only.
3D Model
Bare underframe
3D Model
Top footboard. 2 required, one each side.
3D Model
Bottom footboard. 2 required, one each side.
3D Model
Axlebox and spring. Currently needs some adjustment to fit underframe. 4 needed.
3D Model
Axleguard stay 4 needed.
3D Model
Safety chain and fitting (Difficult to print even in resin). Probably removed later in life of coaches.
3D Model
Buffer head with stem. See also the plain buffer head which can be used with a metal stem.
3D Model
Buffer head for use with metal stem. Head clued onto stem.
3D Model
Buffer housing. 4 off required.
3D Model
Body base to go with the two half body parts which do not have a base.
Reviews/Comments (subject to moderation)