Superelevation wedges

Submitted by Norman Millier on
Zip archve

The following link will allow you to download the complete model and text in a single .zip archive file.

Download complete archive
Alternatively you can access all the files and information below.

These were designed for Cliff Barker track.  There are two versions, 8mm wide and 9.4mm wide, and they give 1,2,3 or 4 mm superelevation. Best to glue or solvent weld them onto the sleeper bases - every three or four sleepers is fine.

Details
Model prototype
Accessories
Model Status
Concept
License
Creative Common Attribution-NonCommercial-ShareAlike CC BY-NC-SA
Models
3D Model
4mm superelevation wedge 8mm wide
3D Model
3mm superelevation wedge 8mm wide
3D Model
2mm superelevation wedge 8mm wide
3D Model
1mm superelevation wedge 8mm wide
3D Model
4mm superelevation wedge 9.4mm wide
3D Model
3mm superelevation wedge 9.4mm wide
3D Model
2mm superelevation wedge 9.4mm wide
3D Model
1mm superelevation wedge 9.4mm wide

Reviews/Comments (subject to moderation)

New reviews/comments will not be published until they have been reviewed by a moderator.
Contact details are optional.
The content of this field is kept private and will not be shown publicly.
About text formats

Restricted HTML

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type> <li> <dl> <dt> <dd> <h2 id> <h3 id> <h4 id> <h5 id> <h6 id>
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.
Please tick if you have built this model
Difficulty
If you have built this model, how difficult did you find it?
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.