Track G1 45mm Gauge

Submitted by Peter Davis on
Zip archve

The following link will allow you to download the complete model and text in a single .zip archive file.

Download complete archive
Alternatively you can access all the files and information below.

Sectional track each printed as one piece.

Details
Model prototype
Accessories
Region/Company
BR
Model Status
Concept
License
Creative Common Attribution-NonCommercial-ShareAlike CC BY-NC-SA
Models
3D Model
Fishplate
3D Model
G1 Track Straight 9 inch 8 Tie.stl
Should fit 220mm x 220mm table rotated 45 degrees.
3D Model
G1 Track Curve 36r 15d 8 tie.stl
Curve 36" radius, 15 degree section. Print 24 to make a circle. Should fit 220mm x 220mm table rotated 38 degrees.
3D Model
G1 Track Curve 20r 22.5d 7 tie.stl
Curve 20"radius, 22.5 degree section. Print 16 to make a circle.
3D Model
90 Degree Crossing
For a figure 8 with the 20" radius: 24 sections of curve and 8 lengths of 9" straight track.

Reviews/Comments (subject to moderation)

New reviews/comments will not be published until they have been reviewed by a moderator.
Contact details are optional.
The content of this field is kept private and will not be shown publicly.
About text formats

Restricted HTML

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type> <li> <dl> <dt> <dd> <h2 id> <h3 id> <h4 id> <h5 id> <h6 id>
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.
Please tick if you have built this model
Difficulty
If you have built this model, how difficult did you find it?
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.