Multiple piece kit style. 10mm scale.
Small parts I used a .2mm nozzle, large parts .4mm nozzle
NSR Milk van
Drawings can be found in Peter Tatlow's "Non-Passenger Coaching Stock, Vol 3"
also in G.F. Chadwick"s "North Staffordshire Wagons".
Drawings can be found in Peter Tatlow's "Non-Passenger Coaching Stock, Vol 3"
also in G.F. Chadwick"s "North Staffordshire Wagons".
NSR Milk van chassis.
Pieces of 1.75 filament are used to locate the floor to the chassis.
Pieces of 1.75 filament are used to locate the floor to the chassis.
Models
3D Model
3D Model
I found an issue with this file which may or may not show up when slicing depending on the slicer. Note the new file name contains rx.
3D Model
Half roof, still 10mm scale
3D Model
10mm scale
3D Model
10mm scale
3D Model
3D Model
3D Model
3D Model
I've added dimples to indicate position holes for hand rails and removed the drawn supports I included earlier. Now you'll have to add supports to suit your situation.
3D Model
I've added dimples to indicate hole location for door handle.
3D Model
Print 2 left and 2 right. Brass Bearing(4) 3/16 od x 1/8 id x .312 long will be needed.
3D Model
3D Model
3D Model
3D Model
you'll want to add supports.
3D Model
Print 1 left and one right
Reviews/Comments (subject to moderation)
NSR Milk Van
I built this some time ago, but only got around to lettering and varnishing it recently. Its easy to print and assemble. Mine is in early LMS livery. The success with this vehicle encouraged me to try some others. Thanks very much Peter for providing an easy to assemble first vehicle for me
.